QPRJ series computer network surge protection device
The appearance of QPRJ series computer network surge protection device adopts the international popular color and static lacquer coating of metal surface; this product is suitable for sensitive communication network lines such as computer network equipment, Router, HUB and MODEM, which will make these equipments avoid the damage caused by over-voltage, disturbed by power and static discharge etc.

■ Working principle
● Adopting front and back second protection; the first protection is coarse protection; the third protection is for discharging energy; the second protection is fine protection used in clamping.
● The front and back two grades make the surge protection device have excellent anti-thunder effect through coupling.
■ Main characteristic
● Complete sorts for matching different products and different interfaces.
● Low residual voltage and small attenuation( ≤ 0.5dB )
● High transmitting speed 10~155(Mbps)
● Convenient installation and large flow capacity
● Central type protection (any request for 1-24 circuit)
■Technical Parameter
Type |
Special Impedance |
Connecting Interface |
Transmitting Rate |
Inserting Loss |
Protected Foot |
External Dimension |
Nominal Flow |
Order No. |
(Ω) |
(Mbps) |
(dB) |
(mm) |
(KA) |
| QPRJ45-24DS |
100 |
RJ45 |
100 |
0.5 |
1、2、3、6/whole pin |
92×40×25 |
5 |
5320 |
| QPRJ11-24DS |
100 |
RJ11 |
10 |
0.2 |
according to client's request |
92×40×25 |
5 |
5321 |
|